Each cell phone holder is not just a practical place to store your phone so you know where it is and you can see the screen while charging it, but also provides a handmade, one-of-a-kind decorative art piece to enhance any area.
Each cell phone holder is made with reclaimed wood either from discarded pallets or wood I’ve rescued from being trashed. The wood has been sufficiently cleaned so it is soft to the touch but it still retains its rustic and/or vintage characteristics. All of the nuts and bolts hardware used in the cell phone holders are upcycled and provide a distinctive industrial touch to the product.
I created this mounted cellphone holder in response to a client’s request. The cellphone is kept in place by cellphone leaning between the front of the large bolt heads and the wooden back. The holding space is adjustable as the bolts can be screwed into the embedded nuts at various lengths (1 in. to 1.5 in.). Four holes are drilled into the wooden backing so the holder can be mounted and four screws and anchors are provided.
The sizes of the cell phone holders vary as follows: L: 7-9 in.; W: 4-5 in.; D: 0.75 in.-1.25 in. (Just the wood) and 3 in. (With the hardware).
Please use the “Contact” section if you have specific requests for the cell phone holder, such as color of the wood or hardware, or the amount of sanding. Requests that require additional work may increase the cost by a few dollars, which Lawless Upcycling will discuss with you before fulfilling the order.
Each cell phone holder is not just a practical place to store your phone so you know where it is and you can see the screen while charging it, but also provides a handmade, one-of-a-kind decorative art piece to enhance any area.
Each cell phone holder is made with reclaimed wood either from discarded pallets or wood I’ve rescued from being trashed. The wood has been sufficiently cleaned so it is soft to the touch but it still retains its rustic and/or vintage characteristics. All of the nuts and bolts hardware used in the cell phone holders are upcycled and provide a distinctive industrial touch to the product.
I created this mounted cellphone holder in response to a client’s request. The cellphone is kept in place by cellphone leaning between the front of the large bolt heads and the wooden back. The holding space is adjustable as the bolts can be screwed into the embedded nuts at various lengths (1 in. to 1.5 in.). Four holes are drilled into the wooden backing so the holder can be mounted and four screws and anchors are provided.
The sizes of the cell phone holders vary as follows: L: 7-9 in.; W: 4-5 in.; D: 0.75 in.-1.25 in. (Just the wood) and 3 in. (With the hardware).
Please use the “Contact” section if you have specific requests for the cell phone holder, such as color of the wood or hardware, or the amount of sanding. Requests that require additional work may increase the cost by a few dollars, which Lawless Upcycling will discuss with you before fulfilling the order.
